symphyllia is dying need help!!

killinit123

New member
as the title states my unknown symphyllia is dying and I have no idea why or how to try and fix it.

I got this coral on a piece of live rock about 1 and 1/2 years ago and up until about 2 weeks ago it had been doing absolutely fine with about an inch growth within the past year. about 2 weeks ago I noticed that the flesh was very constricted and tucked in so I tried feeding it to open it up and nothing. the next day I noticed that the flesh was actually starting to peel away from the skeleton. at this point I tried moving it to a lower flow area thinking this could have been the cause even though it had been in the same position for over a year I had recently changed the configuration on my mp40 and thought it was that. the next day it was even worse and the skeleton became more exposed. I then remembered I had recently moved my led lighting up a couple inches because I was getting some bleaching on my sps so I turned up the intensity a little to see if maybe it wasn't getting enough light. the next day it was even worse. I have no clue as to why this coral all of a sudden is dying rapidly all of the flesh is still there it is just all shrunk up and now about 50-60% of the skeleton is exposed and it does not seem to be getting better. yesterday I did about a little over a 50% water change even though all my parameters were fine and as follows:

nitrate-0
phosphates-0
nitrite-0
ammonia-0
calcium-450
mag-1350
salinity 1.025
ph-8+

if anyone has experience with these corals or has had this problem in the past and was successful at bringing it back to life please feel free to chime in and give your opinion. I am currently at a loss as to what I can or should do. this is one of my favorite corals in my tank and would hate to see it go let alone see it go for reasons unknown. any input will help and thanks in advance to anyone who gives opinions/input.
 
i have been having the same problem with all of my eyuphilla on head at a time..im following along hopefully somebody can help...
 
i have been having the same problem with all of my eyuphilla on head at a time..im following along hopefully somebody can help...

its so weird though I have had this coral for over a year and a half and it just all of a sudden started peeling away from the skeleton
 
I had my Todd's for that long....first to go. 5 heads...1 at a time...the are going in the order I added them too...
 
Have you moved the coral recently? Changed water flow? You said you changed lighting, they do best in moderate to low lighting.
Scratch my last question. You have to have LEDs to increase your lighting. How long have you used LEDs for this tank?
 
Have you moved the coral recently? Changed water flow? You said you changed lighting, they do best in moderate to low lighting.
Scratch my last question. You have to have LEDs to increase your lighting. How long have you used LEDs for this tank?

yes I have leds and I recently added them about 2-3 months ago and I just moved them up an about 2 more inchs about 3 weeks ago, I moved the coral when I noticed it wasn't doing too good but it is still getting the same amount of light and flow it always has gotten
 
yes I have leds and I recently added them about 2-3 months ago and I just moved them up an about 2 more inchs about 3 weeks ago, I moved the coral when I noticed it wasn't doing too good but it is still getting the same amount of light and flow it always has gotten


What type of LED fixture do you have?
 
I have two ocean revive arctic so26's they are 120w each with 48, 3 watt bridgelux leds they are set at about 45% intensity right now and they are on my 75g rimless deepblue tank


I'm not familiar with Ocean Revive. Some folks on the forums and sites had their problem(s) with their coral(s) and most of the issues were cheap LEDs. LEDs are one of the hottest things on the saltwater market right now. Some fixtures aren't setup the way they should be. For example. Some of the cheap LEDs doesn't have optic lens i. e. 90°, 120°. Meaning they don't spread like a T5 or MH reflector they just beam straight down. The problem with that is that some corals don't get the full spectrum needed and only get about 1 color. i.e. Red, white, blue, green etc. so the coral slowly dies off because it's only a matter of time when it doesn't get enough photo light.
 
I'm not familiar with Ocean Revive. Some folks on the forums and sites had their problem(s) with their coral(s) and most of the issues were cheap LEDs. LEDs are one of the hottest things on the saltwater market right now. Some fixtures aren't setup the way they should be. For example. Some of the cheap LEDs doesn't have optic lens i. e. 90°, 120°. Meaning they don't spread like a T5 or MH reflector they just beam straight down. The problem with that is that some corals don't get the full spectrum needed and only get about 1 color. i.e. Red, white, blue, green etc. so the coral slowly dies off because it's only a matter of time when it doesn't get enough photo light.

my lights have a 90 degree angled lenses and i have 2 of them over my 75 i don't think the lighting is a problem. these lights are cheap in cost but quality of product is very good. inn other words they are cheaply priced but not cheaply made. there is still a little flesh left of my coral and it has seemed to stop receding more so hopefully it will bounce back i think i just need to give it some time.
 
i just wanted to update this thread and see if anyone has any input. my symphyllia is now down to just the skeleton all of the flesh has now detached unfortunately. but my question is, will the flesh float around my tank and reattach itself to a substrate and start growing again? i dont know much about these corals and i assume that it will not but figured i would ask and see if anyone had any input on this question. thanks
 
The flesh won't attach itself. If possible remove the flesh that's floating around to eliminate contaminating the tank.
 
Back
Top